Header Graphic
Accessories > Universal Infomir Box Power Supply 12v DC
Universal Infomir Box Power Supply 12v DC

The product you selected is currently unavailable.

Price: $7.20
Availability: in stock
Prod. Code: 256

Universal Infomir Box Power Supply

This power supply is made specifically for Infomir STBs. Ergonomic and lightweight, it can be used with any MAG TV box. If you have lost the original power adapter, this replacement part can replace it without any problems: no need to buy a new STB.

The product is shipped in regionally adapted versions: you can buy one for either European or American sockets.

 

Perfectly Adapted to Every MAG TV Box

MAG 420

MAG 424

MAG 425A

 

Completely Safe and Easy to Use

 

Unlike counterparts from other manufacturers, this power supply for MAG boxes is reliable and ensures safe operation. Its body is made out of highly durable plastic.

You will not have to worry about breaking your Infomir device with an incompatible replacement part. The adapter converts 100–220-volt alternating current into 5-volt direct current.

It is extremely easy to install. Simply plug the TV box power supply in your device and you’re set!

 

 

SPECIFICATIONS 

 

INPUT REQUIREMENTS
Input Voltage Range 100 (–10%) VAC
to 240 (+10%) VAC
Input Frequency Range 47Hz to 63Hz
Input Power Consumption 0.1W Max
Input In-rush Current 60A Max
Input Current 0.35A Max
OUTPUT REQUIREMENTS
Output Voltage +5V
Output Regulation 4.9V – 5.4V
Output Load Range 0-2.0A
Output Ripple & Noise 150mV Max @20 MHz bandwidth with 47uF/E-CAP and 0.1uF/ C-CAP
EFFICIENCY
Efficiency >78.70% @ average of 25/50/75/100% loads 115V&230 VAC input
Line regulation ±5% maximum
Hold-up time 10mS Min at 115Vac/60Hz,
20mS Min at 230Vac/50Hz
Turn on time 3S Max
ADDITIONAL REQUIREMENTS
Leakage Current 0,25mA Max
Dielectric Withstand Voltage (Hi-Pot) Primary to Secondary 3000V/60S
Insulation Resistance 10M ohm at 500Vdc
PROTECTION
Overcurrent protection 2.5A Max
Short Circuit Protection Auto-Recovery
ENVIRONMENTAL CONDITIONS
Temperature and Relative Humidity Storage –30°C ~ +70°C; 10% ~ 90%
Operation 0°C ~ +40°C; 10% ~ 90%
SAFETY STANDARDS
  EN60950-1
UL 60950-1 / CSA C22.2
AS/NZS60950-1
GB4943
BS EN60950-1
J60950
K60950
IEC60950-1
RELIABILITY
Burn-in 2 h at 40°C (±5°C) Nominal input voltage, 80% of rated load
MTBF 50,000 h at 25 °C (when the operation complies with this specification)