Prod. Code: 249
Universal Infomir Box Power Supply
This power supply is made specifically for Infomir STBs. Ergonomic and lightweight, it can be used with any MAG TV box. If you have lost the original power adapter, this replacement part can replace it without any problems: no need to buy a new STB.
The product is shipped in regionally adapted versions: you can buy one for either European or American sockets.
Perfectly Adapted to Every MAG TV Box
Completely Safe and Easy to Use
Unlike counterparts from other manufacturers, this power supply for MAG boxes is reliable and ensures safe operation. Its body is made out of highly durable plastic.
You will not have to worry about breaking your Infomir device with an incompatible replacement part. The adapter converts 100–220-volt alternating current into 5-volt direct current.
It is extremely easy to install. Simply plug the TV box power supply in your device and you’re set!
Input Voltage Range
100 (–10%) VAC
to 240 (+10%) VAC
Input Frequency Range
47Hz to 63Hz
Input Power Consumption
Input In-rush Current
4.9V – 5.4V
Output Load Range
Output Ripple & Noise
150mV Max @20 MHz bandwidth with 47uF/E-CAP and 0.1uF/ C-CAP
>78.70% @ average of 25/50/75/100% loads 115V&230 VAC input
10mS Min at 115Vac/60Hz,
20mS Min at 230Vac/50Hz
Turn on time
Dielectric Withstand Voltage (Hi-Pot)
Primary to Secondary 3000V/60S
10M ohm at 500Vdc
Short Circuit Protection
Temperature and Relative Humidity
Storage –30°C ~ +70°C; 10% ~ 90%
Operation 0°C ~ +40°C; 10% ~ 90%
CSA C22.2 (No. 60950, 60065)
2 h at 35-40°C (±5°C) Nominal input voltage, 80% of rated load
30,000 h at 25 °C (when the operation complies with this specification)
66.5x39.4x34.16 ±2 mm
AC Input Plug